Best Lab Equipment

Here are some more information for Laser Power Meter:

Laser Light Source Covers a Full Range of Optical Fiber Applications

Toronto, Canada- GAO Instruments (www.GAOInstruments.com) highly recommends this smart fiber optic laser light source intended to perform fast and accurate measurements on long-distance and local optical networks. The handheld light source measures the loss in an optical fiber at a range of up to 200km when used in conjunction with a Laser Power Meter.It is an ideal solution for use in field or lab applications.

This well-designed laser light source, model A0630010, offers high stability for accurate fiber optic testing and provides stable power output at a wavelength of 1310nm or 1550nm through a single output connector; its power output is adjustable.The light source can operate in either continuous wave mode or 2kHz modulated mode for up to twelve hours without service interruption. It operates on a single 9V battery and gives a low battery indication when requiring battery replacement.

Visit http://www.GAOInstruments.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 -Toll Free (USA & Canada)
1-416 292-0038 ext. 601 - All Other Areas
sales@gaoinstruments.com
About GAO Instruments
GAO Instruments (www.GAOInstruments.com)is a global leader in research, development and manufacturing of high performance telecommunication testers, electronic measurement instruments and other test and measurement devices.

Toronto, Canada- GAO Instruments (www.GAOInstruments.com) highly recommends this smart fiber optic laser light source intended to perform fast and accurate measurements on long-distance and local optical networks. The handheld light source measures the loss in an optical fiber at a range of up to 200km when used in conjunction with aLaser Power Meter.It is an ideal solution for use in field or lab applications.

This well-designed laser light source, model A0630010, offers high stability for accurate fiber optic testing and provides stable power output at a wavelength of 1310nm or 1550nm through a single output connector; its power output is adjustable.The light source can operate in either continuous wave mode or 2kHz modulated mode for up to twelve hours without service interruption. It operates on a single 9V battery and gives a low battery indication when requiring battery replacement.

Visit http://www.GAOInstruments.com for more information or to purchase this product online.
For any sales inquires please contact:
1-877 585-9555 ext. 601 -Toll Free (USA & Canada)
1-416 292-0038 ext. 601 - All Other Areas
sales@gaoinstruments.com
About GAO Instruments
GAO Instruments (www.GAOInstruments.com)is a global leader in research, development and manufacturing of high performance telecommunication testers, electronic measurement instruments and other test and measurement devices.

About the Author

About GAO Instruments
GAO Instruments (www.GAOInstruments.com)is a global leader in research, development and manufacturing of high performance telecommunication testers, electronic measurement instruments and other test and measurement devices.

Fibreglassing over foam to build a boat - how to do it right?

I am building a CAD model of a boat which I will be slicing up and have plywood spants cut from it by a laser cutter. I'll then assemble the plywood spants in 3D and fill the gaps with foam. Then I'll put fibreglass over everything.
It's supposed to end up being a mix out of a jetski and a sea kayak, about 6 metres in length, powered by a 2 to 3 HP outboard motor, for commuting on a bay in southern NZ (salt water).
Does anyone know how to prepare the foam for the fibreglass, or do I just lash it on and sand later, using filler till it's smooth?
Maybe any links known to relevant sites?
Cheers.

I built a canoe out of wood that I fiberglassed over. Clean the foam with a solvent that won't melt it then you drape the fiberglass cloth over it and brush it down with resin (mixed with hardner). Hard part is to make sure you dont have any air between the cloth and whatever you're putting the cloth on.

Start at one end and work your way to the other end with the resin. so you've always got a wet edge to continue on with. After it dries (a day or so) light sanding, wipe it down to get the dust off of it and make sure there is no oil and go at it again with resin. It should take 3 or 4 coats to completely fill the weave and get a smooth finish. Then you can paint it whatever color you want.

website that might interest you is www.westsystem.com

Micrel to Preview Industry's Most Energy-Efficient, Low Power IC Solutions at Spring IIC China '10
SHENZHEN, CHINA--(Marketwire - March 3, 2010) - Micrel Inc., ( NASDAQ : MCRL ), an industry leader in IC analog, high bandwidth and Ethernet solutions, today announced that it will be showing the industry's newest and energy-efficient, analog, high bandwidth and Ethernet IC solutions at spring 2010 IIC China trade show. The show will be held in: Shenzhen, Shenzhen Convention and Exhibition ...

Thanks for visiting!