Best Lab Equipment

Here are some more information for Viscometer Spindles:

An Introduction To Viscosity And Rheology

What is viscosity?

Viscosity is a measure of the resistance of fluid to an applied stress. In everyday terms it is like the "thickness" of a fluid or gas. For example, water has a low viscosity so it appears "thin". In comparison honey has a higher viscosity so it appears "thick". Viscosity essentially describes a liquids internal resistance to flow and may be thought of as a measure of its internal friction.

The measurement of viscosity is a fairly simple test and the result reported is generally a single number. For the results of a viscosity test to be relevant, they should be compared to the results of tests done at the same temperature. It is normal for fluids to become more viscous at colder temperatures and less viscous at higher temperatures.

What is rheology?

Rheology is a more complex study of the flow of matter; mainly liquids, but also soft solids, gels, pastes and even sold materials that exhibit some level of flow (ie. do not just deform elastically). Rheology applies to substances that have a complex structure, including: muds, sludges, suspensions, polymers, petrochemicals and biological materials. The flow of these complex materials cannot be characterized by a single value of viscosity, instead viscosity changes with changing conditions. For example;

* Ketchup's viscosity lowers when it is shaken
* Cornflour's viscosity increases when it is struck

In practice, rheology is concerned with materials whose properties are between purely elastic material and Newtonian fluids, where mechanical behavior cannot be described by classic theories.

Do I need a viscometer or a rheometer?

There are several ways to measure the viscosity and rheological properties of a material. In both cases the most common testing methods are based around rotational devices that rotate a spindle immersed in a sample. By applying a controlled force or strain and measuring the resulting force or strain, it is possible to understand measure viscosity and understand rheological properties of a material.

The difference between a viscometer and rheometer is essentially the quality of components and control capabilities. Basically, a rheometer is more versatile and has a wider range of applications than a viscometer does.

A rotational viscometer is simple device that rotates a spindle in a single direction. Most viscometers have mechanical bearings that limit the range of applications to more viscous materials. A viscometer is a low cost instrument that is suitable for simple material, process or production tests that require simple flow measurements. A viscometer is highly suitable for quality control testing and is often portable so offer the ability to do remote or field testing.

A rotational rheometer allows far greater characterization of flow and deformation behavior. Rheometers can apply oscillatory motion to the spindles and can also apply large step changes in stress and strain to determine viscoelastic properties as well as flow properties. Rheometers usually use ultra-low friction air bearings which enable much greater sensitivity for low viscosity samples to be measured. Rheometers also tend to offer a wider range of sampling accessories such as temperature control units to study materials under a wider range of conditions.

A rheometer usually represents a greater investment, but can be essential for the true simulation of real processes and complete material characterization. The increased versatility of a rheometer makes it an excellent tool for research, product and process development as well as quality control testing.

Both instruments are complimentary and it is not uncommon to see viscometers and rheometers in a single organization.

About the Author

ATA Scientific specialises in marketing and servicing analytical and scientific instruments, such as particle size analysers, that will be of interest to Researchers and Analysts involved with particle and material sciences, biotechnology and spectroscopy.  To view our range of products, visit Particle Size Analyser.

Does anyone know where to find a good source for measuring viscosity? I need theory and how to for Brookfield.

I need some info that can tell me what speed and spindle to use and when. What affect does changing the speed have on the readig that I get. And is the reading valid if a different speed is used each time the same material is measured? What are some common mistakes to avoid? I am using a Brookfield Viscometer, LVT spindle set 1-4.

did you try the manual?

http://www.engr.sjsu.edu/bjfurman/courses/ME120/me120pdf/BrookfieldDVIImanual.pdf

Thanks for visiting!